If you have been looking for a decent miter saw lately, you know how difficult it can be. There are so many choices, brands, and models that you might get confused very fast. I checked the Internet looking for some expert reviews, but I still wasn’t sure which one to buy. Then I decided to get the DWS779 model by DeWALT. Here is the DWS779 DeWALT Miter Saw review after several months of daily use. I hope this DeWALT DWS779 Review will be helpful for you to decide if this tool is a good choice for you or not.
In this DeWALT Miter Saw Review, I will discuss its specifications, features, pros and cons, and many other things.
Introduction – DeWALT DWS779 Review
The DeWALT DWS779 miter saw is built for power — with a 15-amp motor engineered for performance. Three solid and durable blades increase productivity and reduce the need for blade changes. Expand your reach using multiple works supports or extend out an extra 10″ to get above your workpiece. The DeWALT DWS779 miter saw is stronger than ever before.
It cuts through any job. The compact DWS779 is designed to make accurate crosscuts and bevel cuts at home or on the job site. Its innovative gravity-rise stand makes it easy to set up in seconds. There’s no job too big for this saw to handle a variable-speed motor and three cutting capacities.
What comes with the box?
- Miter saw
- Blade wrench
- Material clamp
- Dustcase
- Instruction handbook
About this item
Stainless steel miter detent plates:
It has a 12-inch miter saw blade that comes with ten positive stops. Stainless steel miter saws are suitable materials for working on handrails, curbing, decking, etc. The plate can be attached to a vibration-absorbing escutcheon bar with included hardware.
Well-defined miter regularity and machined base fencing support:
The DeWALT DWS779 miter saw is a versatile power tool featuring an accuracy miter saw with a machined bottom and front support for smooth, precise work with almost any material. The price is right. This powerhouse miter saw can cut through wood at a rate of up to 46 inches per second.
Long sliding fences hold 6-3/4-inch base vertically
The DWS779 DeWALT Miter Saw is the ultimate miter saw for smaller projects, creating ultra-arrows without the bulk. The fence is tall enough to support multiple measurements with a 7.5-inch fence height. It has a 1/4-inch-thick steel body with a chrome-plated finish and polished aluminum body trimmers, 6-3/4-inch diameter base, and top handle.
Innovative clamping mechanism and linear ball bearings.
The DSW7726 DeWALT miter saw is a clamp saw with an innovative clamping mechanism and linear ball bearings. This saw will allow you to have perfect workpiece alignment every time. The saw is dual horizontal steel rails with an innovative clamping mechanism and linear ball bearings for an accurate, safe, and simple machine operation. The calculated clearance between two rails allows precise and repeatable cuts. The saw blade has a 10-yard maximum cutting capacity, and the blades are soft annealed to provide long life and low blade tension loss.
Features of DWS779 DeWALT Miter Saw review.
Accuracy
With power, accuracy, and durability, the compact DWS779 is a must-have for all professionals. The sliding rail system allows quick adjustments to be made to the miter angle (0 to 50 Degree positive and negative) and allows for miter cuts up to 48″ incapacity.
The large XPS crosscut sled is excellent for cutting large boards. It has a unique hook design that you can use to temporarily secure panels up to 1 -1/2″ thick during installation. The motor has electronic speed controls with an automatic reset feature. This allows the tool to maintain constant speed under load.
Depth stops
The DEWALT DWS779 12-Inch Miter Saw has a 12-inch bevel capacity. Cutting depth up to 3-1/2 inches makes it ideal for trimming, molding, and cross cutting multiple parts. It has a 15 amp motor power that gives ease of use with its built-in auto-release blade tension. It also has a telescoping fence that enlarges the surface of a workpiece by 2 to 7/8 inches. Multiple angles stop at 0 and 47′ degrees and include a 24 gear carbide blade.
Great design
DWS779 DeWALT Miter Saw has an excellent design. It was designed with the constructor in mind but guess what? I am a DIY’er, and I use this tool just like a builder would. Why? Because it works perfectly for the everyday jobs I have around the house.
I have been building birdhouses for my bird feeders and require accurate cuts on wood. Do you know how hard it is to cut a piece of wood and make an even cut? Every time I used my old saw, it was about a 50/50 chance to make an accurate square cut. Now every cut is within.
Also, the blade can move left or right, which is great for making cuts that line up perfectly with each other.
Safety
The DWS779 has numerous features for safety. The first is the anti-kickback pin—a large protrusion on the left side of the saw—that prevents the workpiece from sliding down into the blade if it makes contact with the saw.
Note: It has a transparent guard allowing you to manage the cuts the whole time. However, make sure not to modify the blade guard as you risk critical injuries in doing so.
An effective dust collection system
The DWS779 DeWALT Miter Saw is an innovative dust collection system for your home that captures dust particles, eliminating the mess and hassle of collecting dust in one place. This limited overhead dust collection system captures over 75% of the dust generated. At the same time, you work in the yard, making it easy to prevent dust build-up and increase productivity.
No doubt the DeWALT DWS779 Miter Saw features improved dust collection capabilities. However, it is not that impressive. This model is not the best choice if you especially look out for a better dust collection feature.
Who will benefit from this tool?
There are tons of people who can benefit from this tool. First off, anyone who is in the market for a miter saw will like the fact that this one is specifically designed with home improvements and DIY projects in mind. In addition to those, if you’re a homeowner, you’ll love having the DeWalt DWS779 miter saw. It makes perfect cuts each time, allowing you to make fundamental improvements such as making your doorways taller or cutting new wood down to fit perfectly on your deck.
Pros and cons – DeWALT DWS779 Review
Pros
[su_list icon=”icon: check” icon_color=”#54eb18″]
- Cuts through 4×4 pressure treated wood quickly and smoothly
- High quality and high-end materials used in this product are worth the money spent
- Good manufacturing quality is evident
- It is easy to use and set up
- The blade adjustment mechanism is simple to use and easy to re-adjust
[/su_list]
Cons
[su_list icon=”icon: remove” icon_color=”#eb2418″]
- It is a little heavier than I expected
- The dust collection is not a wow.
[/su_list]
What I most liked about the DeWALT DWS779 miter saw?
Precision and versatility are two words that will immediately pop into my mind when we discuss a miter saw. You know what I mean when it comes to cutting other project materials from lumber. But what happens when you’re using a last-generation miter saw with no integrated belt drive system? The DWS779 is an excellent solution for making clean cuts in wood.
The saw is very accurate, offering good power and low vibration. It can cut consistently and even, right down to 1/4 inch wood. It will take care of small jobs with ease, but larger jobs may require your assistance.
Also, the DWS779 team has done an excellent job of balancing functionality with affordability. Not only is this saw affordable, but it’s also one of the most precise tools I’ve seen in a long time. The motion-based controls make movements incredibly smooth and effortless, even for those with solid hand movements. Our only complaint is that while the fence has many features built-in, it doesn’t include a wrench or wrench driver for those final stage adjustments.
What do people think about the DWS779 miter saw?
People, in general, have a mixed opinion about this miter saw. Some people like it while some people have a lot to complain about. Maybe it all depends on what your requirements are.
If someone buys it to do a simple task, they fall in love with it. However, people who buy this miter saw to tackle heavy projects may get a little disappointed with it. Check also the comparison with DWS716.
Conclusion
DWS779 DeWALT Miter Saw was the product that finally provided a complete solution for anyone needing a miter saw. I came across the product online and tried it on my own, and I loved it. This saw is neither expensive nor of low quality. If you are in need of a miter saw, then depending on your requirement DeWALT DWS779 miter saw might be your good option. Lets hope that DeWALT DWS779 Review helped on your decision.
